Before you shop, take a look at the John Deere 2305. It’s an overachiever in its class. Not only does this tractor come with power steering and a four-wheel-drive system, but it also boasts 2.5 in. thick rubber engine isolators to tone down engine noise and vibration. The result is a tractor that’s easier to operate, steer, and ride, so you can feel confident about your time in the area.
John Deere 2305 Specs
| Brand | John Deere |
| Model | 2305 |
| Type | Sub-compact tractor |
| Series | 2000 Twenty Series |
| Years Made | 2005-2010 |
Engine Specs
John Deere combines fuel efficiency and low noise. The engines are cool enough to run cleanly and quietly, while the completely isolated engine and transmission ensure your tractor is quieter than you’d think possible.
| Brand | John Deere |
| Model | 3TNV76-XJKH |
| Type | Diesel, water-cooled |
| No. of Cylinders | 3 |
| Rated Speed | 3000 RPM |
| Operating Range | 1165-3165 ±25 RPM |
| Combustion | Ball type swirl chamber |
| Aspiration | Natural |
| Lubrication | Forced lubrication with trochoid pump |
| Cooling Fan | 5 bades pusher type |
| Emission | EU Stage V, EPA Tier IV Final, Lower Regulated Countries |
| Firing Order | 1-3-2-1 |
| Compression Ratio | 17.8:1 |
| Starter | 12V electric |
| US | Metric | |
|---|---|---|
| Net Power | 24.1 HP | 18.0 kW |
| PTO Power | 18 HP | 13.4 kW |
| Engine Torque at Rated Speed | 41.7 lb-ft | 56.5 Nm |
| Displacement | 68.1 cu in. | 1116 cc |
| Bore and Stroke | 2.992 x 3.228 in. | 7.6×8.2 cm |
| Fuel Tank Capacity | 5.5 gal | 21 L |
| Coolant System | 0.85 gal | 3.2 L |
Engine Dimensions
| Dimension | US | Metric |
|---|---|---|
| Length | 18.1 in | 48.5 cm |
| Width | 17.2 in. | 43.6 cm |
| Height | 21.1 in. | 53.5 cm |
Engine Weight
| Weight | US | Metric |
|---|---|---|
| Engine Weight (Dry) | 242.5 lbs | 110 kg |
Transmission
| Transmission | Hydrostatic, 2-range (forward/reverse) |
| No. of Speeds | Infinite |
| Gear | Spur |
| US | Metric | |
|---|---|---|
| Transmission Oil Capacity | 3.4 gal | 12.9 L |
Travel Speed
| Gear | US | Metric |
|---|---|---|
| Forward-Low | 4.0 mph | 6.4 km |
| Forward-High | 8.3 mph | 13.4 km |
| Reverse-Low | 4.0 mph | 6.4 km |
| Reverse High | 8.3 mph | 13.4 km |
Power Take-Off (PTO)
| Type | Live Independent |
| Position | Flywheel Side |
| Brake | Wet Disc |
| Speed Mid 1:1 Ratio (High) | 2100 RPM |
| Speed Rear 1:3 Ratio (Low) | 540 RPM |
Dimensions
| Dimension | US | Metric |
|---|---|---|
| Width | 44.9 in. | 114.0 cm |
| Length | 102.0 in. | 259.1 cm |
| Height to Hood | 52.3 in. | 132.8 cm |
| Height to ROPS | 77.5 in. | 196.9 cm |
| Wheelbase | 57.1 in. | 145.0 cm |
| Ground Clearance | 7.7 in. | 19.6 cm |
Tire Size
| Turf Rront | 18×8.5-10 |
| Turf Rear | 26×12.00-12 |
| Ind. Front | 18×8.5-10 |
| Ind. Rear | 26×12.00-12 |
Weight
| Model | US | Metric |
|---|---|---|
| Shipping Weight | 1455 lbs | 660 kg |
| Operating Weight | 1874 lbs | 850 kg |
Performance
| US | Metric | |
|---|---|---|
| Lift Capacity | 681 lbs | 309 kg |
| Pump Capacity | 2.9 gpm | 11 lpm |
Attachments
Whether you are looking to mow lawns, cut brush, or cultivate crops, the John Deere 2305 tractor has compatible for the job. John Deere offers many attachments to enhance your John Deere 2305 tractor and help you get the job done easier.
- John Deere 200CX loader,
- John Deere 260 backhoe,
- 54C and 62C mower deck.
John Deere 2305 Loader
This loader is designed for use with the John Deere upper-medium class tractors (JD 2305, 2320, 2520, 2720) and attaches to them with a pivot bar. It uses double-acting hydraulic cylinders to lift and lower the bucket.
| Brand | John Deere |
| Model | 200CX |
| Leveling | Non-Self |
Buckets
The John Deere 200CX has two types of buckets: a 49″ standard material bucket and a 53″ standard material bucket.
Standard Materıal Bucket 49 in.
| US | Metric | |
|---|---|---|
| Width | 49 in. | 124.5 cm |
| Heaped Capacity | 7.3 cu.ft | 0.21 m³ |
| Struck Capacity | 6.0 cu.ft | 0.17 m³ |
| Bucket Weight | 155.0 lbs | 70.5 kg |
Standard Materıal Bucket 53 in.
| US | Metric | |
|---|---|---|
| Width | 53 in. | 134.6 cm |
| Heaped Capacity | 9.3 cu.ft | 0.26 m³ |
| Struck Capacity | 7.8 cu.ft | 0.22 m³ |
| Bucket Weight | 170.0 lbs | 77.1 kg |
Loader Performance
| US | Metric | |
|---|---|---|
| Lift Capacity to Max. Height at Pivot Point | 902 lbs | 410 kg |
| Breakout Force at Pivot Point | 2240 lbs | 1015 kg |
| Bucket Rollback Force at Max. Height | 1702 lbs | 772 kg |
| Max. Dump Angle | 38° |
| Max. Rollback Angle | 25° |
| Rollback Angle at Full Height | 105° |
Cycle Times
| Loader Raise | 3.2 seconds |
| Bucket Dump | 3.1 seconds |
| Loader Lower | 1.9 seconds |
| Bucket Rollback | 2.0 seconds |
Loader Dimensions
| Max. Lift Height at Pin | 78.5 in. | 199.0 cm |
| Clearance with Bucket Dumped | 72.2 in. | 183.0 cm |
| Reach at Max Lift Height | 29.5 in. | 74.0 cm |
| Reach with Bucket on Ground | 50.3 in. | 127.0 cm |
John Deere 2305 Backhoe
John Deere’s 260 has a large, easy-access step and hand brace. The upgraded valve makes for smooth hydraulics, allowing the operator to make precise movements. An optional field-install thumb option allows the operator to access the stabilizer, boom and swing locks from the seat.
The 260B Backhoe had best-in-class features and was priced competitively with other backhoes in its class.
- The John Deere 260B Mid-Mower deck is compatible with other equipment, allowing the operator to work more efficiently.
- John Deere 260B is equipped with a durable subframe that helps provide strength and rigidity to the tractor frame and transmission.
- All backhoe controls have rubber boots to protect the operator.
- Tool-free installation/removal in a matter of minutes.
| Brand | John Deere |
| Model | 260B |
| Swing Arc | 150° |
| Bucket Rotation | 180° |
| Angle of Departure | 20° |
John Deere 260 Backhoe Performance
| US | Metric | |
|---|---|---|
| Digging Depth | 74.8 in. | 190 cm |
| Digging Force – Dipperstick | 1187 lbs | 538 kg |
| Digging Force – Bucket | 2036 lbs | 924 kg |
| Boom Lift Capacity | 285 lbs | 129 kg |
| Height | 66.9 in. | 170 cm |
| Bucket Width | 8.0 to 16 in. | 20 cm to 40 cm |
| Weight with Bucket (16 in.) | 610 lbs | 277 kg |
John Deere 2305 Mower Deck
| Brand | John Deere |
| Model | 62C |
| Type | Mid-mount |
| No. of Blade | 3 |
| Cut Positions | 13 |
John Deere 62C Mower Deck Performance
| US | Metric | |
|---|---|---|
| Cutting Width | 62 in. | 157.5 cm |
| Cut Height | 1 to 5 in. | 2.5 to 12.7 cm |
| Weight | 200 lbs | 90.7 kg |
John Deere 2305 Vs 1025r
| John Deere 2305 | John Deere 1025r | |
|---|---|---|
| Horsepower | 24.1 HP-18.0 kW | 23.9 HP-17.8 kW |
| Transmission | Hydrostatic infinite | Hydrostatic infinite |
| Max. Travel Speed | 8.3 mph-13.4 km | 9.4 mph-15.1 km |
| Lifting Capacity | 681 lbs-309 kg | 758 Ibs-344 kg |
| Operating Weight | 1455 lbs-660 kg | 1556 Ibs-705 kg |
I used a 2305 John Deere this past week and I really impressed with the 12" auger. The machine preforms great, it seems to be fuel efficient, comfortable, and has a very smooth transmission. The JD 2305 is great for landscaping in urban environments. It’s equipped with chains, but it’s best suited for concrete surfaces. John Deere 2305 Review
Performance
Features
Reliability
Drive
Price
The information presented here will help you decide if this product is the best fit for your situation. Though we do our best to provide all the information you need, things can always change. So be sure to do your own research before purchasing a vehicle, because the information in this review may become outdated over time. If you would like exact details, please contact the vendor directly.
